With the miniaturization of SMD components and the higher requirements of SMT process, the requirements for SMT testing equipment are becoming higher and higher.

Automatic Optical Inspection (AOI) is a kind of equipment that has developed rapidly and has great market potential in recent years. AOI equipment originated 2000 years ago, but it was not recognized by the market because of its high price and poor detection effect. The real development of AOI is that after 2005, AOI equipment suppliers are everywhere, new products emerge in endlessly, and domestic AOI equipment rises. Because the use effect of domestic AOI equipment is not inferior to that of foreign equipment, the price of AOI has dropped by 1/3 or even halved. As the price drops, the detection effect improves, and the labor cost can be reduced, more and more manufacturers choose to use automatic optical equipment AOI to replace manual detection. After all, the error rate of equipment is far lower than that of manual. In terms of cost, the reduced labor cost can offset the machine cost. In the off-season of business, the machine only needs to be put there for maintenance, but you can't say that I will dismiss you in the off-season if you are manual. When business is good, I will hire you back, and you must always keep it and pay your salary. Therefore, AOI is now a necessary equipment for SMT manufacturers.

MV-8515-M parameters:

Detection element
-Small Chip component, 01005 IC small pitch; 0.3mm

Inspection method
Artificial intelligence and pattern recognition

optical system

Gigabit network interface, color CCD camera (5.0M pixels),

The resolution is 15um,

Light source and lens
RGB ring multi angle LED light source, digital constant current controller, 5.0M pixel level telecentric lens, depth of field 8-10mm

Detection speed: 3500mm?

computer
CPU: 15-3.0G, GPU: 4G, memory: DDRlll-8G, hard disk: 5000G, display: 24 inch LED widescreen LCD Windows8-64Bit Ptfederal

mechanical system
PCB thickness: 0.3-5.0mm (PCB thickness: ≤ 5mm); Optional central support can eliminate the influence of deformation

PCB component height

SMT-AOI; Upper 30mm; Lower 30mm (special height can be customized) DIP-AOI; Upper 30mm; Lower 30mm (special height can be customized)

Drive equipment

Servo motor rolling screw linear guide

Motion speed
Max*600mm/s

positioning accuracy
≦8 μ m

PCB transport height: 900± 20mm (from the ground to the PCB rail transport surface)

MV-8515-M-PCB size: 330 * 250mm

Power Supply
AC220V, 50HZ, 1300W, UPS, 1000VA, uninterruptible power supply

Overall dimensions
MV-8515-M: 1430mm * 965mm * 1000mm (excluding the height of warning light, which is 550mm)
MV-8515-M:650KG